This website uses cookies to improve the visitor experience. Learn more or Accept

Contact us on 01782 896025

Projects

We have recently completed a wide range of projects for a variety of clients. For a full article about each project, click on a small image below.

Click on a small image to zoom.

Mira | SAS Automation & Coval Vacuum Products

Mira | SAS Automation & Coval Vacuum Products

We supplied a full turnkey project for Kolfer Mira.

Vacucom were asked to supply a solution to handle various moulds which had to be taken from the mould tool and then offered onto trimming stations and then packaged.

We came up with a cost effective solution to supply and install a Jib crane with Demag ergo hoist which we then attached a Coval vacuum unit and by utilising the SAS framing system and quick change unit enabling the customer to change heads very quickly with minimal downtime.

Belljar | Vacuum Products

Belljar | Vacuum Products

We were asked to come up with a simple yet effective solution for a large national company who manufactures cheese to enable them to take samples and check for air leakage on bagged produce.

With our vast knowledge of vacuum products and theory we designed and manufactured a belljar which was light and portable and could be used very quickly to establish the integrity of any batch of product with minimum effort and would give instant results.

MGI Manifold | SAS Automation & Vacuum Grippers

MGI Manifold | SAS Automation & Vacuum Grippers

Vacucom supply SAS automation EOAT parts and with the range we supply from SAS customers are able to order parts only and then build their own grippers from the parts we supply.

Vacucom mainly supply SAS parts as full working and tested grippers and manipulators, here is an example of a gripper we supplied to one of our customers who moulds automotive parts.

We were asked to design and build a gripper to handle a very thin manifold which was only 10mm diameter.

To handle the sprue, we introduced two single acting sprue grippers and due to the length of the sprue which needed to be granulated we needed to introduce a sprue cutter which proved very successful.

UTZ | End of Arm Tooling & Vacuum Products

UTZ | End of Arm Tooling & Vacuum Products

Vacucom supplied and installed a full turnkey project in which we supplied a Kuka 6 axis robot and magazine station, the final project included roller and belt driven conveyors end of arm tooling and guarding plus installation and intergration

VAC Easy Lifter | Vacuum Cups & Vacuum Products

VAC Easy Lifter | Vacuum Cups & Vacuum Products

Sheet steel handling,

Coval 800kg vacuum lifter supplied by Vacucom with compact energy saving 3 phase electrical motor, even if there is a power cut the load will stay in situ due to a safety non return valve from the pump to the pad network.

The main beam acts as a reservoir and ensures that the load can be handled safely if or when power failure occurs, CE marked to European directives, with electrical or pneumatic versions available and 2, 3 and 4 beam sizes available.

Please ask for competitive quotation.